Blackmagic Design ATEM Microphone Converter
The Blackmagic Design ATEM Microphone Converter enables you to add more microphones to your setup and allows audio input expansion for your ATEM Television Studio for converting four analogue XLR inputs to MADI. This converter is equipped with two BNC MADI I/O ports. The Microphone Converter plugs into the ATEM Television Studio MADI port, with no complex setup needed. The four XLR-1/4" combo analogue inputs are mic-/mic-/line-selectable and provide 48V phantom power.
The Blackmagic Design ATEM Microphone Converter employs 32-bit float digital preamps and eight ADCs per input to capture clip-free, 24-bit / 48 kHz recordings. This leads to a low floor noise, a wide dynamic range, and very low distortion.
For your convenience, you will find an HDMI output with a scrolling audio waveform to monitor the status of the audio. USB and Ethernet ports allow for remote admin and software updates via the ATEM Software Control app.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Blackmagic Design ATEM Microphone Converter
Blackmagic Design ATEM Microphone Converter
The Blackmagic Design ATEM Microphone Converter enables you to add more microphones to your setup and allows audio input expansion for your ATEM Television Studio for converting four analogue XLR inputs to MADI. This converter is equipped with two BNC MADI I/O ports. The Microphone Converter plugs into the ATEM Television Studio MADI port, with no complex setup needed. The four XLR-1/4" combo analogue inputs are mic-/mic-/line-selectable and provide 48V phantom power.
The Blackmagic Design ATEM Microphone Converter employs 32-bit float digital preamps and eight ADCs per input to capture clip-free, 24-bit / 48 kHz recordings. This leads to a low floor noise, a wide dynamic range, and very low distortion.
For your convenience, you will find an HDMI output with a scrolling audio waveform to monitor the status of the audio. USB and Ethernet ports allow for remote admin and software updates via the ATEM Software Control app.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Blackmagic Design ATEM Microphone Converter enables you to add more microphones to your setup and allows audio input expansion for your ATEM Television Studio for converting four analogue XLR inputs to MADI. This converter is equipped with two BNC MADI I/O ports. The Microphone Converter plugs into the ATEM Television Studio MADI port, with no complex setup needed. The four XLR-1/4" combo analogue inputs are mic-/mic-/line-selectable and provide 48V phantom power.
The Blackmagic Design ATEM Microphone Converter employs 32-bit float digital preamps and eight ADCs per input to capture clip-free, 24-bit / 48 kHz recordings. This leads to a low floor noise, a wide dynamic range, and very low distortion.
For your convenience, you will find an HDMI output with a scrolling audio waveform to monitor the status of the audio. USB and Ethernet ports allow for remote admin and software updates via the ATEM Software Control app.
